Made by Athmer in Germany, this drop seal addresses one of the biggest issues associated with pivot doors, namely how do you seal them?
Until now, the traditional drop seals have been fouled by the floor spring hardware or the nature of how the unit engages. These issues have now been addresses by the very clever adjustable roller actuator, thanks to Athmer. The actuator has been designed to engage the drop seal not by pressing against a specific spot on the jamb, but rather, by rolling against an area of the jamb.
Note:
Specifically designed for pivot doors swinging from 90 to 180 degrees.
Low profile and sleek design.
Maximum seal drop of 20mm.
Suitable for high frequency opening doors.
Parallel actuation & self-levelling mechanisms.
Made from industrial strength silicon and aluminium.
Tested to 1,000,000 operating cycles.
Suitable for internal & external (under cover) locations.
Suitable for residential, commercial & industrial environments.
Available in eight different lengths for doors from 820 – 2000mm.
Depending on seal selected additional freight to send out maybe required (contact us for more information).
When specifying this drop seal with a FritsJurgens System M or M+ pivot hinge and the standard floor plate, a minimum of 6mm is required between the face of the bottom pivot body to the face of the drop seal profile in order to avoid having the silicon collide with the pivot floorplate when the drop seal deploys.
With the FritsJurgens flush floor plate, no minimum distance is required, This seal can be used with any suitable pivot system, subject to door thickness.
Warrantee
5 Year Manufacturer Warrantee
Returns Policy
A restocking fee on items returned will apply, a minimum of $10.00 or 20%. Goods in a non resalable condition, custom item or special finish will not be returnable manufactured to order therefore are NON-RETURNABLE
Athmer L15/30 Pivot Door Drop Seals
$594.09 – $1,242.06 incl GST
Description
Made by Athmer in Germany, this drop seal addresses one of the biggest issues associated with pivot doors, namely how do you seal them?
Until now, the traditional drop seals have been fouled by the floor spring hardware or the nature of how the unit engages. These issues have now been addresses by the very clever adjustable roller actuator, thanks to Athmer. The actuator has been designed to engage the drop seal not by pressing against a specific spot on the jamb, but rather, by rolling against an area of the jamb.
Note:
Specifically designed for pivot doors swinging from 90 to 180 degrees.
Low profile and sleek design.
Maximum seal drop of 20mm.
Suitable for high frequency opening doors.
Parallel actuation & self-levelling mechanisms.
Made from industrial strength silicon and aluminium.
Tested to 1,000,000 operating cycles.
Suitable for internal & external (under cover) locations.
Suitable for residential, commercial & industrial environments.
Available in eight different lengths for doors from 820 – 2000mm.
Depending on seal selected additional freight to send out maybe required (contact us for more information).
Lead times listed under additional information.
Finish: Silver Aluminium
Additional information
Athmer
BELBAA946/0820, BELBAA946/0920, BELBAA946/1070, BELBAA946/1210, BELBAA946/1333, BELBAA946/1583, BELBAA946/1708, BELBAA946/1883, BELBAA946/2000
BELBAA946/0820 From 820mm – 635mm, BELBAA946/0820 920mm – 760mm, BELBAA946/1070 1070mm – 885mm, BELBAA946/1210 1210mm-, BELBAA946/1333 1333mm – 1135mm, BELBAA946/1583 1583mm – 1385mm, BELBAA946/1708 1708mm – 1510mm, BELBAA946/1883 1883mm – 1635mm, BELBAA946/2000 2000mm – 1885mm
33mm
14.8mm
Minimum Door Thickness 61mm
Minimum Door Thickness 55mm
When specifying this drop seal with a FritsJurgens System M or M+ pivot hinge and the standard floor plate, a minimum of 6mm is required between the face of the bottom pivot body to the face of the drop seal profile in order to avoid having the silicon collide with the pivot floorplate when the drop seal deploys.
With the FritsJurgens flush floor plate, no minimum distance is required, This seal can be used with any suitable pivot system, subject to door thickness.
5 Year Manufacturer Warrantee
A restocking fee on items returned will apply, a minimum of $10.00 or 20%. Goods in a non resalable condition, custom item or special finish will not be returnable manufactured to order therefore are NON-RETURNABLE
Allow 5-7 working days
Athmer Drop Seals
DownloadQR Code
Related products
Raven RP73 Door Seal
$56.01 incl GST Select options This product has multiple variants. The options may be chosen on the product pageRaven RP29 Threshold Plate
$116.98 – $251.55 incl GST Select options This product has multiple variants. The options may be chosen on the product pageRaven RP57 50mm Brush Strip Seal
$112.18 – $244.04 incl GST Select options This product has multiple variants. The options may be chosen on the product page