Designed for self-closing pivot doors that swing 90 or 180 degrees.
System M+ is embedded with FlowMotion technology that gives the user complete control over the closing speed, latching speed and dampening (hydraulic back check). These features are guaranteed for doors up to 500kg and 50mm thickness.
It consists of a top pivot and bottom pivot and their mounting plates in either black or stainless silver. It utilises the same Top Pivot and small Ceiling Plate as the other FritsJurgens pivot hinge Systems. The Bottom Pivot/Closure is set into the Floor Plate which provides an easy adjustment of the 0° position of the door to ensure installation to absolute perfection.
When the door is closed, the system is virtually invisible. No nasty floor coverplate to hide, no getting the jackhammer out to install a closer cement box. System M+ is morticed entirely into the door.
Note:
Door width 400 -5000mm.
Hold closed positions at 0°.
Hold open positions at 90° and -90°.
Self closing from-125° to + 125°.
Fully adjustable whilst in the door.
Load-bearing capacity up to 500kg.
32mm thick unit requires a minimum door thickness of 40mm.
42mm thick unit requires a minimum door thickness of 50mm.
Tested to 1,000,000 cycles.
Patented, made 100% in the Netherlands.
Fully installed in the door and not in the floor.
No cutting into concrete slabs or timber floors.
FlowMotion for smooth controllable hydraulic door movement.
No unsightly large floor plate to visually interrupt the look & feel of the floor.
For commercial and residential applications.
For internal and external doors.
For single and double action doors.
Suitable for timber, steel, framed glass and massive cladded doors.
Maintenance free.
No structural elements in floor and ceiling.
Don’t hesitate to get in touch with us if you need assistance in ordering the correct pivot.
Lead times under additional information.
Frits Jurgens System M+ Pivots 40mm Pivot Point
$3,074.58 – $5,317.46 incl GST
Description
Designed for self-closing pivot doors that swing 90 or 180 degrees.
System M+ is embedded with FlowMotion technology that gives the user complete control over the closing speed, latching speed and dampening (hydraulic back check). These features are guaranteed for doors up to 500kg and 50mm thickness.
It consists of a top pivot and bottom pivot and their mounting plates in either black or stainless silver. It utilises the same Top Pivot and small Ceiling Plate as the other FritsJurgens pivot hinge Systems. The Bottom Pivot/Closure is set into the Floor Plate which provides an easy adjustment of the 0° position of the door to ensure installation to absolute perfection.
When the door is closed, the system is virtually invisible. No nasty floor coverplate to hide, no getting the jackhammer out to install a closer cement box. System M+ is morticed entirely into the door.
Note:
Door width 400 -5000mm.
Hold closed positions at 0°.
Hold open positions at 90° and -90°.
Self closing from-125° to + 125°.
Fully adjustable whilst in the door.
Load-bearing capacity up to 500kg.
32mm thick unit requires a minimum door thickness of 40mm.
42mm thick unit requires a minimum door thickness of 50mm.
Tested to 1,000,000 cycles.
Patented, made 100% in the Netherlands.
Fully installed in the door and not in the floor.
No cutting into concrete slabs or timber floors.
FlowMotion for smooth controllable hydraulic door movement.
No unsightly large floor plate to visually interrupt the look & feel of the floor.
For commercial and residential applications.
For internal and external doors.
For single and double action doors.
Suitable for timber, steel, framed glass and massive cladded doors.
Maintenance free.
No structural elements in floor and ceiling.
Don’t hesitate to get in touch with us if you need assistance in ordering the correct pivot.
Lead times under additional information.
Finish: Stainless Steel, Black
Additional information
Frits Jurgens
BELFJS/STM+40AFSSS Flush Squared Floor Plate SSS, BELFJS/STM+40AFSBK Flush Squared Floor Plate EMB Black, BELFJS/STM+40ASSS Squared Floor Plate SSS, BELFJS/STM+40ASBK Squared Floor Plate PVD Black, BELFJS/STM+40BFSSS Flush Squared Floor Plate SSS, BELFJS/STM+40BFSBK Flush Squared Floor Plate EMB Black, BELFJS/STM+40BSSS Squared Floor Plate SSS, BELFJS/STM+40BSBK Squared Floor Plate PVD Black, BELFJS/STM+40CFSSS Flush Squared Floor Plate SSS, BELFJS/STM+40CFSBK Flush Squared Floor Plate EMB Black, BELFJS/STM+40CSBK Squared Floor Plate PVD Black, BELFJS/STM+40CSSS Squared Floor Plate SSS, BELFJS/STM+40DFSSS Flush Squared Floor Plate SSS, BELFJS/STM+40DFSBK Flush Squared Floor Plate EMB Black, BELFJS/STM+40DSSS Squared Floor Plate SSS, BELFJS/STM+40DSBK Squared Floor Plate PVD Black, BELFJS/STM+40EFSSS Flush Squared Floor Plate SSS, BELFJS/STM+40EFSBK Flush Squared Floor Plate EMB Black, BELFJS/STM+40ESSS Squared Floor Plate SSS, BELFJS/STM+40ESBK Squared Floor Plate PVD Black, BELFJS/STM+40FFSSS Flush Squared Floor Plate SSS, BELFJS/STM+40FFSBK Flush Squared Floor Plate EMB Black, BELFJS/STM+40FSSS Squared Floor Plate SSS, BELFJS/STM+40FSBK Squared Floor Plate PVD Black, BELFJS/STM+40GFSSS Flush Squared Floor Plate SSS, BELFJS/STM+40GFSBK Flush Squared Floor Plate EMB Black, BELFJS/STM+40GSSS Squared Floor Plate SSS, BELFJS/STM+40GSBK Squared Floor Plate PVD Black
40mm Minimum Door Thickness
System M+ pivots are equipped with Flow Motion technology that increases the adjustability and control of the door while it is standing. Through the use of hydraulic power, the sytem M+ offers a series of features including damper Control, 30º Speed Control and Latch Control.
Damper Control, ensures a smooth and elegant closing movement that protects your door from touching the wall (back check).
30º Speed Control allows you to determine the speed of the pivot door through the last part of the closing movement.
Latch control accelerates the door shortly before closed position to ensure proper latching.
It is important to order the correct size pivot to suit finished door weight, IF DOOR WEIGHT IS UNDER OR OVER-CALCULATED WEIGHT DOOR WILL NOT FUNCTION AS EXPECTED.
If unsure please contact us for additional information before ordering or installing, as incorrectly ordered pivots are not able to be credited.
Underside of door to finished floor clearance is 11mm, pivot adjustable left and right hand direction
Underside of door to finished floor clearance is 7mm,however using this options removes the ability to adjust pivotin a left or right hand direction
Floor plate glued to hard surface with special glue provided
If installing over thick carpet and underlay, contact us regarding adapter plate to raise height of desired pivot floor plate
2 Years Manufacturers Warranty
A restocking fee on items returned will apply, a minimum of $10.00 or 20%. Goods in a non-resalable condition, custom item or special finish will not be returnable
Allow 5-7 working days
FritsJurgens 70 and 40mm Pivots Catalogue
DownloadFrits Jurgens System Mounting Manual
DownloadFritsJurgens Fine Tuning Adjustment Instructions
DownloadQR Code
You may also like…
Frits Jurgens System One 500kg Pivot
$1,261.41 incl GST Select options This product has multiple variants. The options may be chosen on the product pageFrits Jurgens System 3 500kg Pivot
$2,178.03 incl GST Select options This product has multiple variants. The options may be chosen on the product pageRelated products
Lockwood 7724 Standard Door Closure Size 2-4
$433.55 incl GST Add to cartDorma 7471K 200kg Bottom Floor Pivot
$133.54 incl GST Add to cartLCN 6030 Concealed Door Closures
$1,251.20 – $1,691.08 incl GST Select options This product has multiple variants. The options may be chosen on the product page