Description
The LCN 4040SE series is a heavy duty, non-handed, non-sized closer/holder designed to provide a single point hold open for fire and smoke barrier doors. The door is held open until current interruption releases the holding mechanism and the door closes. Meets most life safety requirements. Single lever (track) arm closer specifically designed for interior doors.
Note:
Universal, fully reversible, non-handed door closer.
Closer cylinder constructed of high strength cast iron for increased durability.
Tested to 1,500,00 cycles.
Fully adjustable 1-4 strength.
Factory set to strength 3.
Closer mounts on either pull or push side of the door.
Independent adjustment valves for adjusting backcheck, closing and latching speeds.
Adjustable hold open force.
24V DC input.
Concealed or surface wiring options.
Momentary on/off switch board assembly for testing door release, as well as providing over-voltage protection.
The switch board is field replaceable.
Interfaces with fire alarm system.
Functions as a full rack and pinion closer when hold open is not engaged or the current is interrupted.
Closer mounted according to LCN instructions require minimal periodic adjustments. Monthly, quarterly, and annual visual inspections are recommended.
Finish: Aluminum
LCN 4040 Sentronic Series Fire/Life Safety Closers
$238.51 – $1,436.93 incl GST
Description
The LCN 4040SE series is a heavy duty, non-handed, non-sized closer/holder designed to provide a single point hold open for fire and smoke barrier doors. The door is held open until current interruption releases the holding mechanism and the door closes. Meets most life safety requirements. Single lever (track) arm closer specifically designed for interior doors.
Note:
Universal, fully reversible, non-handed door closer.
Closer cylinder constructed of high strength cast iron for increased durability.
Tested to 1,500,00 cycles.
Fully adjustable 1-4 strength.
Factory set to strength 3.
Closer mounts on either pull or push side of the door.
Independent adjustment valves for adjusting backcheck, closing and latching speeds.
Adjustable hold open force.
24V DC input.
Concealed or surface wiring options.
Momentary on/off switch board assembly for testing door release, as well as providing over-voltage protection.
The switch board is field replaceable.
Interfaces with fire alarm system.
Functions as a full rack and pinion closer when hold open is not engaged or the current is interrupted.
Closer mounted according to LCN instructions require minimal periodic adjustments. Monthly, quarterly, and annual visual inspections are recommended.
Finish: Aluminum
Additional information
Allegion
ALLCE24129 24V Single Point Sentronic Closer Strength 1-4, ALLCP25073 Track to Suit 24V, ALLCP25071 Track Arm
Internal Door 711 – 1219mm
30 years Mechanical
2 years Electronic
Allow 7-14 working days
A restocking fee on items returned will apply, a minimum of $10.00 or 20%. Goods in a non-resalable condition, custom item or special finish will not be returnable
QR Code
Related products
Lockwood 7714 Standard Door Closure Size 1-4
$406.49 incl GST Add to cartDorma 7471AX 300kg Heavy Duty Bottom Pivot
$149.64 incl GST Add to cartLockwood 115kg Timber or Aluminium Door Pivot Set
$240.27 incl GST Add to cart